|
 |
|
WEST System Pigments |
WEST System Pigments are available in three colors, white, black and gray. The pigments are suspended in an epoxy resin base which allows them to blend thoroughly into the epoxy to make very uniform colors.
Adding WEST System pigment to epoxy should, like everything in life, be done in moderation. Without exception, adding pigment to WEST System Epoxy will weaken the cured physical properties to some small degree. Because of this, we suggest you use very small amounts of pigment, about 5% by weight. As a result, thin films of colored epoxy are somewhat transparent. It usually requires several coats to make the film opaque.
Powdered epoxy additives also change the color of epoxy. 423 Graphite Powder makes epoxy black; 420 Aluminum Powder makes epoxy gray.
|
|
|
 |
 |
 |
 |
|
|
|
4oz. White Pigment for WEST System Epoxy |
4oz. White Pigment for WEST System Epoxy can be added to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1.5 gal of epoxy.
WEST System 501 White pigment is an epoxy-based liquid colorant used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional paint or UV filter coating for ultraviolet protection.
|
Price: $23.45
|
|
|
|
|
 |
 |
 |
 |
|
 |
 |
 |
 |
|
|
|
4oz. Gray Pigment by WEST System |
4oz. Gray Pigment by WEST System can be added to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1.5 gal of epoxy.
WEST System 503 Gray pigment is an epoxy-based liquid colorant used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional paint or UV filter coating for ultraviolet protection.
|
Price: $23.45
|
|
|
|
|
 |
 |
 |
 |
|
 |
 |
 |
 |
|
|
|
4oz. Black Pigment by WEST System |
4oz. Black Pigment by WEST System can be added to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1.5 gal of epoxy.
WEST System 502 Black pigment is an epoxy-based liquid colorant used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional paint or UV filter coating for ultraviolet protection.
|
Price: $23.45
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
.
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . .  | |
Fiberglass Supply
11824 Watertank Rd
Phone 509-493-3464
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: support@fiberglasssupply.com
|
| |
 |
|