Robin Air 15400 Vacuum Pump is a two stage rotary vane vacuum pump.
From a practical standpoint all of our rotary vane pumps pull the same amount of vacuum, the difference is how many cubic feet of air per minute they can move (CFM). The larger pumps will evacuate a vacuum bag faster and overcome small leaks better than the smaller pumps. The 15400 moves 4 CFM.
Pump includes oil. Fittings are sold seperately.
Price: $467.35 / EA
NOTE: Items are not refundable
You may also be interested in: -
AQD 500 TF Quick Disconnect Coupler Assembly AQD 500 TF Quick Disconnect Assembly. The AQD Coupler is self sealing so that when you un-join the couple both sides seal shut to maintain vacuum. This is handy for moving parts under vacuum from work area to oven or autoclave. Suitable for temperatures up to 500F.
Threaded with 1/4" Female NPT. Will fit directly on 401C vacuum cups and 59R hose.
Price: Varies by Qty
10 ft. Length Econoflow 59R Vacuum Hose 10 ft. Length Econoflow 59R Vacuum Hose. This is a low temperature silicone vacuum hose with a steel core. Durable and long lasting it features 1/4" Male NPT threaded ends. Suitable for use up to 275F. Great to run from pump to resin trap or direct to part on prepreg or parts that will not have resin entering into hose.
Can be connected to 401C vacuum cup with a 1/4" Female NPT coupler.
Price: Varies by Qty
PE Tubing 1/2" OD 1/2" Outside diameter, 3/8" Inside diameter polyethylene tubing/hose. Use with RIC vacuum connectors and 3/8" barbed fittings.
The 2.3 Quart Resin Trap is designed to protect your vacuum pump and catch excess resin during resin infusion or other vacuum bagging processes. This trap can also be used as a degassing chamber for removing excess or trapped gasses from resins or silicone.
2.3 Quart Resin Trap/ Degassing Chamber includes 3/8" O.D. barbed fittings and vacuum gauge.
This resin trap is large enough to hold a 1 quart cup for degassing and is suitable for degassing 10-16 ounces of material (by volume) depending on how much the material rises during degassing.
The 2.3 quart resin trap features a clear top so that you can observe what is happening during degassing or how much material has entered the resin trap.
The catch pot is stainless steel and mold release can be applied to it to facilitate clean up or a liner cup can be inserted before use to catch any excess resin.
Barbed fittings are fastened to the lid with 1/4 pipe thread and can be removed and replaced with other fittings as desired.