Fiberglass
 
 



 

Price Range
Product Type
Sort By
Keyword
Plumbing
Hoses, Fittings, and Gauges for Vacuum Bagging
Vacuum Bagging Supplies Plumbing

Membrane Infusion Hose
Membrane covered hose for creating the outgoing vacuum line for resin infusion projects.  Goretex type membrane allows air to flow through hose to vacuum while keeping resin out of the line.  

Allows bagging with smaller brake areas, keeps resin out of pump lines, and helps mitigate uneven flow fronts.

Simplifies the resin infusion process and aids in having a successful infusion on one off items or for inexperienced users. 

Creates a closed hydralic system avoiding bleeding of the laminate.

Sold by the foot.
Price:Varies by Qty


Squeezee 0.6" Line Clamp
Squeezee 0.6" Line Clamp
Squeeze Line clamp securely locks off PE hose for infusion projects and allows you to tune in the flow rate by adjusting the size of the opening.  

Solidly built to last years.
 

Price:Varies by Qty

MTI Infusion Valve
MTI Infusion Valve
One way spring and ball valve for infusion.  The valve helps control resin flow into an infused part to retain optimal compaction of the laminate.  It provides:
  • Optimal fiber volume fraction
  • Less room for failures in setting up the process
  • Enhanced process reliability

Price:Varies by Qty

1/2" Infusion Connector RIC 12
1/2" Infusion Connector RIC 12
1/2" Infusion Connector RIC 12, use to attach vacuum ports or resin inlet lines to vacuum bag.  Goes under bag and 1/2" OD hose can be inserted into it.  Groove through bottom accepts 1/2" OD spiral wrap to form manifolds.  Apply release before use to facilitate removing excess resin from connectors.  
Weight 0.1

Price:Varies by Qty

FS Resin Trap 2.3 Quart Volume
FS Resin Trap 2.3 Quart Volume

The 2.3 Quart Resin Trap is designed to protect your vacuum pump and catch excess resin during resin infusion or other vacuum bagging processes.  This trap can also be used as a degassing chamber for removing excess or trapped gasses from resins or silicone.

2.3 Quart Resin Trap/ Degassing Chamber includes 3/8" O.D. barbed fittings and vacuum gauge.

This resin trap is large enough to hold a 1 quart cup for degassing and is suitable for degassing 10-16 ounces of material (by volume) depending on how much the material rises during degassing.

The 2.3 quart resin trap features a clear top so that you can observe what is happening during degassing or how much material has entered the resin trap. 

The catch pot is stainless steel and mold release can be applied to it to facilitate clean up or a liner cup can be inserted before use to catch any excess resin.

Barbed fittings are fastened to the lid with 1/4 pipe thread and can be removed and replaced with other fittings as desired.


Price:$147.72

FS Resin Trap 1.5 Quart Volume
FS Resin Trap 1.5 Quart Volume

1.5 Quart Resin Trap designed to protect your vacuum pump/system and catch excess resin during infusion or vacuum bagging processes.

1.5 Quart Resin Trap includes 3/8" O.D. barbed fittings, vacuum gauge, and stainless steel catch pot.

This resin trap features a clear lid to allow you to see if any material has entered the pot and if so how much.  The stainless steel catch pot can be coated with release agent to allow removal of excess material, or a cup can be inserted as a liner to catch excess material.


Weight 2

Price:$118.72

1/2" FIP x 1/4" FIP connector for 15400 and 15600
1/2" FIP x 1/4" FIP connector for 15400 and 15600
1/2" FIP x 1/4" FIP to connect barbed fittings to the 15400 and 15600 vacuum pumps.
Weight 0.1

Price:$10.77

Barbed fitting 3/8" ID Hose x 1/4" Female NPT
Barbed fitting 3/8" ID Hose x 1/4" Female NPT
Barbed fitting 3/8" ID Hose x 1/4" Female NPT.  Use on 401C vacuum cups or on any 1/4 Male NPT threaded part.
Weight 0.1

Price:$8.16

Barbed fitting 3/8" ID Hose x 1/4" Male NPT
Barbed fitting 3/8" ID Hose x 1/4" Male NPT
Barbed fitting 3/8" ID Hose x 1/4" Male NPT.  Use to attach hoses to the vacuum pump via the FIP connector,or to attach hoses to the resin traps.
Weight 0.1

Price:$6.76

2.5 Gallon Airtech Resin Trap
2.5 Gallon Airtech Resin Trap

2.5 Gallon Airtech RB 451 Resin Trap/Vacuum Reservoir.

The Airtech RB-451 is designed to catch excess resin during resin infusion or closed molding processes using vacuum assistance.  The unit comes equipped with a vacuum regulator/gauge for reduced vacuum and leak detection applications.

The RB-451 resin trap comes equipped with a AQD 500 quick disconnect and a 3/8" OD barbed fitting.  Other fittings included are 1/2" OD barbed fitting and 5/8" OD barbed fitting.  The resin trap also includes a polyethylene liner.


Weight 10

Price:$496.39

PE Tubing 1/2" OD
PE Tubing 1/2" OD
1/2" Outside diameter, 3/8" Inside diameter polyethylene tubing/hose.  Use with RIC vacuum connectors and 3/8" barbed fittings.  

Sold by the foot, full rolls are 100'

Weight 0.1

Price:Varies by Qty

NTF38, Nylon T Fittings 3/8" barb
NTF38, Nylon T Fittings 3/8" barb
NTF38, Nylon T Fittings, use to branch and splice 1/2" OD polyethylene tubing.  
Weight 0.1

Price:Varies by Qty

1/2" Diameter Infusion Spiral Wrap
1/2" Diameter Infusion Spiral Wrap
1/2" Diameter Infusion Spiral Wrap.  Use to vacuum manifolds and resin runners.  1/2" OD 3/8" ID.  Can often be resused.
 

Weight 0.1

Price:Varies by Qty

10 ft. Length Econoflow 59R Vacuum Hose
10 ft. Length Econoflow 59R Vacuum Hose
10 ft. Length Econoflow 59R Vacuum Hose.  This is a low temperature silicone vacuum hose with a steel core.  Durable and long lasting it features 1/4" Male NPT threaded ends.  Suitable for use up to 275F.  Great to run from pump to resin trap or direct to part on prepreg or parts that will not have resin entering into hose.

Can be connected to 401C vacuum cup with a 1/4" Female NPT coupler.

Weight 3

Price:Varies by Qty

AQD 500 TF Quick Disconnect Coupler Assembly
AQD 500 TF Quick Disconnect Coupler Assembly
AQD 500 TF Quick Disconnect Assembly.  The AQD Coupler is self sealing so that when you un-join the couple both sides seal shut to maintain vacuum.  This is handy for moving parts under vacuum from work area to oven or autoclave.  Suitable for temperatures up to 500F.

Threaded with 1/4" Female NPT.  Will fit directly on 401C vacuum cups and 59R hose.

Weight 0.5

Price:Varies by Qty

[ 1 ] 2
Next >>
List All Items
20 Items Found in Vacuum Bagging Supplies Plumbing - 2 Result Pages Product Search
.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Fiberglass Supply
11824 Watertank Rd
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: Rich@fiberglasssupply.com
 

Click to view this Product
1/2" Infusion Connector RIC 12
1/2" Infusion Connector RIC 12, use to attach vacuum po...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
Squeezee 0.6" Line Clamp
Squeeze Line clamp securely locks off PE hose for infusion p...

Price: Varies by Qty
Add to cart Enlarge

HOME      |     ABOUT      |     PRODUCTS      |     TERMS      |     PRIVACY      |     FAQ      |     ORDER STATUS      |     CONTACT US
 
Copyright Fiberglass Supply. All Rights Reserved.
Powered by Fortune3