|
 |
|
 |
 |
 |
 |
|
|
|
1 1/4in. Leash Plug, Black |
1 1/4in. Leash Plug, Black, these leash cups are our most popular and we have sold tens of thousands of them over the years.
Leash cup features concentric rings that create ledges to lock the leash cup into the board. Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup. Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst. Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board. After the putty cures sand the putty and the cup level with the surface of the board.
|
Price: Varies by Qty
|
|
|
|
|
 |
 |
 |
 |
|
 |
 |
 |
 |
|
|
|
1 1/4in. Leash Plug, White |
1 1/4in. Leash Plug, White, these leash cups are our most popular and we have sold tens of thousands of them over the years.
Leash cup features concentric rings that create ledges to lock the leash cup into the board. Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup. Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst. Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board. After the putty cures sand the putty and the cup level with the surface of the board.
|
Price: Varies by Qty
|
|
|
|
|
 |
 |
 |
 |
|
 |
 |
 |
 |
|
|
|
1in. Leash Plug, Black |
1in. Leash Plug, Black, these leash cups are our most popular and we have sold tens of thousands of them over the years.
Leash cup features concentric rings that create ledges to lock the leash cup into the board. Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup. Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst. Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board. After the putty cures sand the putty and the cup level with the surface of the board.
|
Price: Varies by Qty
|
|
|
|
|
 |
 |
 |
 |
|
|
 |
 |
 |
 |
|
|
|
1in. Leash Plug, White |
1in. Leash Plug, White, these leash cups are our most popular and we have sold tens of thousands of them over the years.
Leash cup features concentric rings that create ledges to lock the leash cup into the board. Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup. Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst. Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board. After the putty cures sand the putty and the cup level with the surface of the board.
|
Price: Varies by Qty
|
|
|
|
|
 |
 |
 |
 |
|
 |
 |
 |
 |
|
|
|
EZ Plug Deck Mounting Points |
EZ Plug Deck Mounting Points, or stick on leash cup. EZ plug features a thermoplastic loop that bonds to the surface of a surfboard or paddleboard using 3M VHB adhesive. This is a fast non-intrusive way to add a leash to a board or configure mounting points for gear and equipment. Essentially the process is clean, sand lightly, peel, stick, and go.
|
Price: Varies by Qty
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
.
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . .  | |
Fiberglass Supply
11824 Watertank Rd
Phone 509-493-3464
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: support@fiberglasssupply.com
|
| |
 |
|