Fiberglass
 
 



 
Empty Image Silicone Rubber
Corner Image Corner Image
 
 
Corner Image Table Bottom Corner Image
Corner Image Corner Image
 

1 Pint Tin Cure RTV Silicone Rubber

Use for molds, mandrels, or even parts like gaskets and seals.    Easy to use tin cure formula cures against a broad variety of substrates INCLUDING sulfur clay.

Holds fine detail and is pourable.  It can be made brushable with the addition of a thickener.

Stretches up to 400%  which is great for use as mandrels in hollow parts, also great for casting where you have 3 dimensional parts with fine detail and under cuts.

Great resistance to chemical attack, works well with polyurethanes and epoxies. Some materials that are commonly cast into this are: Urethane, plaster, soap, wax, polyester casting resin, and epoxy.

25A durometer

Mix ratio is 10:1



Price: $42.00 / Each


 
 
Corner Image Below Image Corner Image

NOTE: Items are not refundable

.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Fiberglass Supply
11824 Watertank Rd
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: Rich@fiberglasssupply.com
 

1 Quart Tin Cure RTV Silicone Rubber
Use for molds, mandrels, or even parts like gaskets and seals.    Easy to use tin cure formula cures against a broad variety of substrates INCLUDING sulfur clay.

Holds fine detail and is pourable.  It can be made brushable with the addition of a thickener.

Stretches up to 400%  which is great for use as mandrels in hollow parts, also great for casting where you have 3 dimensional parts with fine detail and under cuts.

Great resistance to chemical attack, works well with polyurethanes and epoxies. Some materials that are commonly cast into this are: Urethane, plaster, soap, wax, polyester casting resin, and epoxy.

25A Durometer

Mix ratio is 10:1
 

Price: $65.00 / Each
Add to cart Enlarge
1 Pint Tin Cure RTV Silicone Rubber
Use for molds, mandrels, or even parts like gaskets and seals.    Easy to use tin cure formula cures against a broad variety of substrates INCLUDING sulfur clay.

Holds fine detail and is pourable.  It can be made brushable with the addition of a thickener.

Stretches up to 400%  which is great for use as mandrels in hollow parts, also great for casting where you have 3 dimensional parts with fine detail and under cuts.

Great resistance to chemical attack, works well with polyurethanes and epoxies. Some materials that are commonly cast into this are: Urethane, plaster, soap, wax, polyester casting resin, and epoxy.

25A durometer

Mix ratio is 10:1

Price: $42.00 / Each
Add to cart Enlarge
1 Gallon Tin Cure RTV Silicone Rubber Kit
Use for molds, mandrels, or even parts like gaskets and seals.    Easy to use tin cure formula cures against a broad variety of substrates INCLUDING sulfur clay.

Holds fine detail and is pourable.  It can be made brushable with the addition of a thickener.

Stretches up to 400%  which is great for use as mandrels in hollow parts, also great for casting where you have 3 dimensional parts with fine detail and under cuts.

Great resistance to chemical attack, works well with polyurethanes and epoxies. Some materials that are commonly cast into this are: Urethane, plaster, soap, wax, polyester casting resin, and epoxy:1

Mix ratio is 10:1

Price: $112.61 / Each
Add to cart Enlarge

HOME      |     ABOUT      |     PRODUCTS      |     TERMS      |     PRIVACY      |     FAQ      |     ORDER STATUS      |     CONTACT US
 
Copyright Fiberglass Supply. All Rights Reserved.
Powered by Fortune3