2 Pint Kit, 2 lb. Density Pour Foam

Designed for pour in place floatation or insulation. This is a two component foam kit that makes approx 1.15 cubic feet of foam.  Can also be used to make free form structures, to repair voids in sailboards and paddleboards.  Has a light tan color.

For best results pour in temperatures between 60-80F (make sure the foam components are at temperature). 

2 Quart Kit, 2 lb. Density Pour Foam

Designed for pour in place floatation or insulation. This is a two component foam kit that makes approx 2.3 cubic feet of foam.  Can also be used to make free form structures, to repair voids in sailboards and paddleboards.  Has a light tan color.

For best results pour in temperatures between 60-80F (make sure the foam components are at temperature). 

For calculation purposes a cubic foot of seawater weighs approx 62 lbs

2 Gallon Kit, 2 lb. Density Pour Foam

Designed for pour in place floatation or insulation. This is a two component foam kit that makes approx 9.2 cubic feet of foam.  Can also be used to make free form structures, to repair voids in sailboards and paddleboards.  Has a light tan color. This kit makes enough foam to fill a 55 gallon drum.

For best results pour in temperatures between 60-80F (make sure the foam components are at temperature). 

For calculation purposes a cubic foot of seawater weighs approx. 62lbs.

10 Gallon Kit, 2 lb. Density Pour Foam

Designed for pour in place floatation or insulation. This is a two component foam kit that makes approx 45 cubic feet of foam.  Can also be used to make free form structures, to repair voids in sailboards and paddleboards.  Has a light tan color.

For best results pour in temperatures between 60-80F (make sure the foam components are at temperature). 

For calculation purposes a cubic foot of seawater weighs approx. 62lbs.

2 Pint Kit, 8 lb. Density Pour Foam

This is a rigid polyurethane pour foam that is suitable for use in tooling, taxidermy, or for making parts.  It is often used in the sailboard industry to reinforce under deck pads, to fill voids, and to repair damaged areas around fin boxes or mast tracks. 

This 2 pint kit will make approx. .27 cubic feet of foam.

For best results mix and apply at temperatures between 60-80F.

2 Quart Kit, 8 lb. Density Pour Foam

This is a rigid polyurethane pour foam that is suitable for use in tooling, taxidermy, or for making parts.  It is often used in the sailboard industry to reinforce under deck pads, to fill voids, and to repair damaged areas around fin boxes or mast tracks. 

This 2 quart kit will make approx. .54 cubic feet of foam.

For best results mix and apply at temperatures between 60-80F.

2 Gallon Kit, 8 lb. Density Pour Foam

This is a rigid polyurethane pour foam that is suitable for use in tooling, taxidermy, or for making parts.  It is often used in the sailboard industry to reinforce under deck pads, to fill voids, and to repair damaged areas around fin boxes or mast tracks. 

This 2 gallon kit will make approx. 2.13 cubic feet of foam.

For best results mix and apply at temperatures between 60-80F.

10 Gallon Kit, 8 lb. Density Pour Foam

This is a rigid polyurethane pour foam that is suitable for use in tooling, taxidermy, or for making parts.  It is often used in the sailboard industry to reinforce under deck pads, to fill voids, and to repair damaged areas around fin boxes or mast tracks. 

This 10 gallon kit will make approx. 10 cubic feet of foam.

For best results mix and apply at temperatures between 60-80F.

Pint, Component A, Pour Foam

For use with Component B of either 2lb or 8lb pour foam, mix at a ratio of 1:1 by weight.

For use with Component B of either 2lb or 8lb pour foam, mix at a ratio of 1:1 by weight.

For use with Component B of either 2lb or 8lb pour foam, mix at a ratio of 1:1 by weight.

For use with Component B of either 2lb or 8lb pour foam, mix at a ratio of 1:1 by weight.

Pint, Component B, 2 lb. cu./ft Pour Foam.

For use with pour foam Component A.

Quart, Component B, 2 lb. cu./ft. Pour Foam

For use with pour foam component A.