1/2" Diameter Infusion Spiral Wrap. Use to vacuum manifolds and resin runners. 1/2" OD 3/8" ID. Can often be resused.
Quantity Price / FOOT
Qty
Price
1 - 9
$0.79
10 - 44
$0.67
45 - 99
$0.59
100 +
$0.55
Weight
0.1
NOTE: Items are not refundable
Customers that purchased spiral wrap also purchased: -
Econo-Stitch 2.6 oz x 60" Peel Ply Econo stitch peel ply is similar to Econoply E but has red tracers throughout that are a visual indicator that there is peel ply on a part. Useful on parts that are to be bonded to make sure that the peel ply is not left on the part before bonding.
Econostitch is made with a nylon yarn and full rolls are 300 yards long.
Price: Varies by Qty
Stretchlon 800 x 60" Roll, 200 Stretchlon 800 x 60" wide vacuum bagging film. Stretchlon 800 is our most popular bagging film. It features high elongation (450%) and is compatible with epoxy resins, polyester resin, and vinylester resins. Maximum use temperature is 400F
Stock width is 60" but other widths or configurations (such as tubing) is available by request.
Price: Varies by Qty
Roll Y-204 Sealant Tape, (25ft Roll) Y-204 Sealant Tape is by far our most popular vacuum bagging tape. It features a 1/8" x 1/2" profile that makes it easy to seal small leaks and work out wrinkles. It features a 400F service temperature and is suitable for most all vacuum bagging applications. 40 rolls per case.
Price: Varies by Qty
PE Tubing 1/2" OD 1/2" Outside diameter, 3/8" Inside diameter polyethylene tubing/hose. Use with RIC vacuum connectors and 3/8" barbed fittings.
Green Flow as it is commonly referred to is a flow media designed to efficiently distribute resin with little waste due to its low profile and tight construction. Greenflow is compatible with polyester, vinylester, and epoxy resins. Sold by the yard or in full rolls. A full roll is 350' long approx. 117 yards.
Price: Varies by Qty
1/2" Infusion Connector RIC 12 1/2" Infusion Connector RIC 12, use to attach vacuum ports or resin inlet lines to vacuum bag. Goes under bag and 1/2" OD hose can be inserted into it. Groove through bottom accepts 1/2" OD spiral wrap to form manifolds. Apply release before use to facilitate removing excess resin from connectors.