Fiberglass
 
 



 
Empty Image Reinforcements Small Arrow Fiberglass Cloth
Corner Image Corner Image
 
 
Corner Image Table Bottom Corner Image
Corner Image Corner Image
 

Style 7534 X 30 in 6oz Warp, E-glass

Style 7534 X 30 in 6oz Warp, E-glass

Commonly refered to as 6oz warp glass, this is surfboard grade fiberglass, meaning that it is quality inspected to be free of both cosmetic and structural defects.  This glass is finished with a silane finish to provide a perfectly clear laminate and is compatible with polyester and epoxy resins.

Warp glass was designed for use in the surfboard building industry to place more strength in the length of the board while keeping the overall weight of the glass the same.  Warp glass has more yarns running the length of the glass and less in the fill than regular 4oz, which provides more strength where you need it without increasing the weight of the board.

Suggested uses are for building surfboards, covering kayaks or canoes, or any application where you need a thin clear glass coating.

A typical surfboard layup is 2 layers of glass on the deck and 1 layer on the bottom.


Quantity Price / Yard


 
 
Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
 
Style 7534 or 7580
Weight 6.2 oz per square yard
Thickness .0078
Breaking Strength 300lbs/in Warp, 200lbs/in Fill
 
Corner Image Table Bottom Corner Image

NOTE: Items are not refundable
Approx Weight: 0.30 lb. / Yard Dimensions (LxWxH): 31.00 x 4.00 x 0.05 in.

Corner Image Table Top Corner Image
Empty Image
   You may also be interested in: -
Table Side Image
Empty Image
Futures 1/2
Futures 1/2" ILT White Box-X
Futures 1/2" ILT White Box-X

Standard 1/2" deep Futures Fin Box, accepts fins with a 1/2" tang such as thruster center fins and smaller quad fins.

To increase the versatility of a quad fin setup you can install 3/4" boxes for all 4 fins and use a shim to install the 1/2" tanged fins.

Price: Varies by Qty

1in. Leash Plug, White
1in. Leash Plug, White
1in. Leash Plug, White, these leash cups are our most popular and we have sold tens of thousands of them over the years.

Leash cup features concentric rings that create ledges to lock the leash cup into the board.  Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup.  Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst.  Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board.  After the putty cures sand the putty and the cup level with the surface of the board.

Price: Varies by Qty

Simple Shaping Calipers
Simple Shaping Calipers
Quality Shaping Calipers made from Okoume marine plywood. Simple to use and well built.
Price: $20.34

Table Side
Corner Image Corner Image Corner Image
.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Fiberglass Supply
11824 Watertank Rd
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: Rich@fiberglasssupply.com
 

You may also be interested in:
Click to view this Product
Futures 1/2" ILT White Box-X
Futures 1/2" ILT White Box-X Standard 1/2" deep Futures...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
1in. Leash Plug, White
1in. Leash Plug, White,  these leash cups are our most ...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
Simple Shaping Calipers
Quality Shaping Calipers made from Okoume marine plywood. Si...

Price: $20.34 / Each
Add to cart Enlarge

HOME      |     ABOUT      |     PRODUCTS      |     TERMS      |     PRIVACY      |     FAQ      |     ORDER STATUS      |     CONTACT US
 
Copyright Fiberglass Supply. All Rights Reserved.
Powered by Fortune3