The model G100 gel coat spray gun is suitable to use with gelcoats and resins. It features an easy to use, easy to clean construction. Often referred to as a dump gun because it doesn't have a needle there are no internal parts to gum up with resin or gelcoat.
Great for spraying smaller parts up to the size of an 8-10ft boat.
There are a variety of tips available to match the material you are spraying.
Fits directly onto the G-100 Spray gun, use and then dispose of. Can be used again if rim is cleaned or used immediately in subsequent batches before resin or gelcoat kicks off.
1000 cc. Graduated Polyethylene Cup for G-100 Spray Gun.
Fits very securely on G-100 gelcoat gun lid, remove by blowing compressed air into nozzle of gun. Keep hand over lid and wear eye protection.
If gelcoat is mixed in other container before being put into the plastic cup it will usually remove cleanly after it cures from the cup, allowing you to re-use the cup multiple times.
Water/Oil seperator and pressure control. Place as close to spray gun as possible to filter out oil and condesation from air line before it reaches gun. Necessary to achive good results when spraying paint, gelcoat, and PVA
Preval Sprayer, Complete Unit, the Preval sprayer is a DIY spray paint system, you provide the paint or material to be sprayed and the unit acts like a can of spray paint when you don't have a spray gun system or the material you need doesn't already come in a spray can.
Includes spray cartridge and bottle. Works well for spraying PVA.