Commonly refered to as 6oz glass, this is surfboard grade fiberglass, meaning that it is quality inspected to be free of both cosmetic and structural defects. This glass is finished with a silane finish to provide a perfectly clear laminate and is compatible with polyester and epoxy resins.
Suggested uses are for building surfboards, covering kayaks or canoes, or any application where you need a thin clear glass coating.
A typical surfboard layup is 2 layers of glass on the deck and 1 layer on the bottom.
(F)1.5 Gallon Kit Resin Research 2000CE Epoxy Resin and Fast Hardener. This kit contains 1 Gallon resin and 2 quarts hardener.
The Resin Research 2000CE is the industry standard for surfboard building epoxies. The 2000CE is UV Stable and has has been optically brightened to make the board appear whiter.
Resin Research 2000CE can be used alone or with Kwik Kick as a hot coating or fill coating resin. Both can be used with Additive F as a surfacing agent or sanding aid.
Fast hardener has a pot life of 25 min @ 77 F and a set time of 2.5 hours
1 1/4in. Leash Plug, White 1 1/4in. Leash Plug, White, these leash cups are our most popular and we have sold tens of thousands of them over the years.
Leash cup features concentric rings that create ledges to lock the leash cup into the board. Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup. Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst. Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board. After the putty cures sand the putty and the cup level with the surface of the board.
Price: Varies by Qty
8' Ocean Earth Surfboard Leash 8' long Ocean Earth Surfboard Leash. Suitable for boards from 7-8 foot long. Features dual extruded urethane cord and an easy to use built in leash rope. Colors vary.
