Fiberglass
 
 



 
Empty Image Vacuum Bagging Supplies Small Arrow Breather
Corner Image Corner Image
 
 
Corner Image Table Bottom Corner Image
Corner Image Corner Image
 

Airweave N4 Breather x 60" Wide

Airweave N4 Breather x 60" wide.

Airweave N4 is a non-woven polyester breather/bleeder designed to be soft and conformable to avoid bridging.  It also protects against bag failure in sharp radii and channels air under high pressures to get even vacuum pressure throughout the entire part.

Airweave is has a high melt point and can easily be slit down to narrow widths.

 


Quantity Price / YARD


 
 
Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
 
Weight 0.45
 
Corner Image Table Bottom Corner Image

NOTE: Items are not refundable


Corner Image Table Top Corner Image
Empty Image
   You may also be interested in: -
Table Side Image
Empty Image
(S)1.5 Gallon Kit Silvertip Laminating Epoxy Kit
(S)1.5 Gallon Kit Silvertip Laminating Epoxy Kit

(S)1.5 Gallon Kit Silvertip Laminating Epoxy and Hardener

System Three Silvertip epoxies are our preferred epoxies for boat building.  The laminating resin system is perfectly clear and easy to use.  It also is a blush free epoxy making boat building much simpler by not having to deal with blush between coats. 

The System Three Silvertip Epoxy also features an easy to use 2:1 mix ratio that can be dispensed with plunger pumps or by measuring. 

More information on using epoxies can be found in the Epoxy Book


Price: $185.50

Econo-Ply E, 2.74 oz. X 60in. Peel Ply
Econo-Ply E, 2.74 oz. X 60in. Peel Ply
Econo-Ply E, 2.74 oz. X 60in. wide peel ply is our most popular peel ply.  Econoply E is economical as well as being tough to not tear when removing from parts.  

Econoply E is made from an uncoated polyester yarn and is suitable for temperatures up to 300F.    Full rolls of Econoply E are 250 yards.  

Price: Varies by Qty

BleederLease B Release Coated Peel Ply
BleederLease B Release Coated Peel Ply

BleederLease B nylon peel ply is a high temperature peel ply coated with a silicone release agent to make removing the peel ply from the part easier.

Bleeder Lease B is 60" wide and sold by the yard.  Full rolls are 100 yards long.

Bleeder Lease B is 1.83oz per square yard, .0045" thick, and has a maximum service temperature of 450F.

Bleeder Lease B ships on a roll unless otherwise requested.
 


Price: Varies by Qty

Perforated Release Bag-125, .001
Perforated Release Bag-125, .001" x 60" Wide P3 Pe
Perforated Release Bag-125, .001 in x 60 in. wide with P3 perf.  Polyolefin release film compatible with most standard resin systems (epoxy, vinylester, polyester).  Perferations allow excess resin to squeeze out of part and into breather. Max. service temperature is 275F.

P3 pattern is .015" holes staggered on 1/4" centers.

Price: Varies by Qty

Stretchlon 800 x 60
Stretchlon 800 x 60" Roll, 200
Stretchlon 800 x 60" wide vacuum bagging film.  Stretchlon 800 is our most popular bagging film.  It features high elongation (450%) and is compatible with epoxy resins, polyester resin, and  vinylester resins. Maximum use temperature is 400F

Stock width is 60" but other widths or configurations (such as tubing) is available by request.

Price: Varies by Qty

Roll Y-204 Sealant Tape,  (25ft Roll)
Roll Y-204 Sealant Tape, (25ft Roll)
Y-204 Sealant Tape is by far our most popular vacuum bagging tape.  It features a 1/8" x 1/2" profile that makes it easy to seal small leaks and work out wrinkles.  It features a 400F service temperature and is suitable for most all vacuum bagging applications.  40 rolls per case.
Price: Varies by Qty

401C Twist Lock Aluminum Vacuum Cup
401C Twist Lock Aluminum Vacuum Cup
401C Twist Lock Aluminum Vacuum Valve/Cup.

The 401C is a simple but durable twist lock vacuum attachment cup for prepreg, clamping, and wet layup vacuum bagging operations.  Simply slide the bottom piece under the vacuum bag and then put a small slit in bag and attach top piece by inserting the bayonet through the hole and twisting it shut.  

Features a 1/4" Male NPT nipple that a Quick Disconnect or barbed fitting can be attached to.
Can be used up to 500F.  

Other vacuum valves available by special order, please contact us.

Price: Varies by Qty

Empty Image
Empty Image
Table Side
Corner Image Corner Image Corner Image
.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Fiberglass Supply
11824 Watertank Rd
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: Rich@fiberglasssupply.com
 

You may also be interested in:
Click to view this Product
(S)1.5 Gallon Kit Silvertip Laminating Epoxy Kit
(S)1.5 Gallon Kit Silvertip Laminating Epoxy and Hardener ...

Price: $185.50 / EA
Add to cart Enlarge
Click to view this Product
Econo-Ply E, 2.74 oz. X 60in. Peel Ply
Econo-Ply E, 2.74 oz. X 60in. wide peel ply is our most popu...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
BleederLease B Release Coated Peel Ply
BleederLease B nylon peel ply is a high temperature pe...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
Perforated Release Bag-125, .001" x 60" Wide P3 Pe
Perforated Release Bag-125, .001 in x 60 in. wide with P3 pe...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
Stretchlon 800 x 60" Roll, 200
Stretchlon 800 x 60" wide vacuum bagging film.  St...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
Roll Y-204 Sealant Tape, (25ft Roll)
Y-204 Sealant Tape is by far our most popular vacuum bagging...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
401C Twist Lock Aluminum Vacuum Cup
401C Twist Lock Aluminum Vacuum Valve/Cup. The 401C is ...

Price: Varies by Qty
Add to cart Enlarge

HOME      |     ABOUT      |     PRODUCTS      |     TERMS      |     PRIVACY      |     FAQ      |     ORDER STATUS      |     CONTACT US
 
Copyright Fiberglass Supply. All Rights Reserved.
Powered by Fortune3