800 Grit 3M Imperial Wet/ Dry Sandpaper 9" x 11" sheets uses  utilizes a premium, aluminum oxide mineral, an improved paper backing, and an optimized construction that results in the following performance advantages: improved rate of cut, increased abrasive life, increased flexibility, and uniform, consistent finish.

Often used on power pads with feathering disc adhesive for machine sanding boats, surfboards, kayaks, or automotive parts.

Fits the following sanding blocks/boards:

• 3M 2 3/4" x 4 7/8" Block, cut strips across the width of the paper
• 8 1/2 x 3" Block, cut strips down the length of the paper
• 9/12 x 2 3/4" Board, cut strips down the length of the paper

Pack (5 Sheet), 800 Grit 3M Imperial Wet/ Dry Sandpaper 9" x 11" sheets uses  utilizes a premium, aluminum oxide mineral, an improved paper backing, and an optimized construction that results in the following performance advantages: improved rate of cut, increased abrasive life, increased flexibility, and uniform, consistent finish.

Often used on power pads with feathering disc adhesive for machine sanding boats, surfboards, kayaks, or automotive parts.

Fits the following sanding blocks/boards:

• 3M 2 3/4" x 4 7/8" Block, cut strips across the width of the paper
• 8 1/2 x 3" Block, cut strips down the length of the paper
• 9/12 x 2 3/4" Board, cut strips down the length of the paper

Often used on power pads with feathering disc adhesive for machine sanding boats, surfboards, kayaks, or automotive parts.

Fits the following sanding blocks/boards:

• 3M 2 3/4" x 4 7/8" Block, cut strips across the width of the paper
• 8 1/2 x 3" Block, cut strips down the length of the paper
• 9/12 x 2 3/4" Board, cut strips down the length of the paper

Often used on power pads with feathering disc adhesive for machine sanding boats, surfboards, kayaks, or automotive parts.

Fits the following sanding blocks/boards:

• 3M 2 3/4" x 4 7/8" Block, cut strips across the width of the paper
• 8 1/2 x 3" Block, cut strips down the length of the paper
• 9/12 x 2 3/4" Board, cut strips down the length of the paper

Often used on power pads with feathering disc adhesive for machine sanding boats, surfboards, kayaks, or automotive parts.

Fits the following sanding blocks/boards:

• 3M 2 3/4" x 4 7/8" Block, cut strips across the width of the paper
• 8 1/2 x 3" Block, cut strips down the length of the paper
• 9/12 x 2 3/4" Board, cut strips down the length of the paper

80 Grit Open Mesh Sanding Screen, 9" x 11" sheets

The open mesh allows sanding dust to pass through and not clog up the sand "paper". Good for sanding surfaces that create a lot dust, such as foam, surfboard blanks, spackle, plaster, etc. 

For shaping the rails of surfboards the sanding screen softens with time and gets better the longer you use it.

100 Grit Open Mesh Sanding Screen, 9" x 11" sheets

The open mesh allows sanding dust to pass through and not clog up the sand "paper". Good for sanding surfaces that create a lot dust, such as foam, surfboard blanks, spackle, plaster, etc. 

For shaping the rails of surfboards the sanding screen softens with time and gets better the longer you use it.

120 Grit Open Mesh Sanding Screen, 9" x 11" sheets

The open mesh allows sanding dust to pass through and not clog up the sand "paper". Good for sanding surfaces that create a lot dust, such as foam, surfboard blanks, spackle, plaster, etc. 

For shaping the rails of surfboards the sanding screen softens with time and gets better the longer you use it.

180 Grit Open Mesh Sanding Screen, 9" x 11" sheets

The open mesh allows sanding dust to pass through and not clog up the sand "paper". Good for sanding surfaces that create a lot dust, such as foam, surfboard blanks, spackle, plaster, etc. 

For shaping the rails of surfboards the sanding screen softens with time and gets better the longer you use it.

220 Grit Open Mesh Sanding Screen, 9" x 11" sheets

The open mesh allows sanding dust to pass through and not clog up the sand "paper". Good for sanding surfaces that create a lot dust, such as foam, surfboard blanks, spackle, plaster, etc. 

For shaping the rails of surfboards the sanding screen softens with time and gets better the longer you use it.

60 Grit Open Mesh Sanding Screen, 4" wide, sold by the foot. Full rolls are 75 feet.

The open mesh allows sanding dust to pass through and not clog up the sand "paper". Good for sanding surfaces that create a lot dust, such as foam, surfboard blanks, spackle, plaster, etc. 

For shaping the rails of surfboards the sanding screen softens with time and gets better the longer you use it.

100 Grit Open Mesh Sanding Screen, 4" wide, sold by the foot. Full rolls are 75 feet.

The open mesh allows sanding dust to pass through and not clog up the sand "paper". Good for sanding surfaces that create a lot dust, such as foam, surfboard blanks, spackle, plaster, etc. 

For shaping the rails of surfboards the sanding screen softens with time and gets better the longer you use it.

220 Grit Open Mesh Sanding Screen, 4" wide, sold by the foot. Full rolls are 75 feet.

The open mesh allows sanding dust to pass through and not clog up the sand "paper". Good for sanding surfaces that create a lot dust, such as foam, surfboard blanks, spackle, plaster, etc. 

For shaping the rails of surfboards the sanding screen softens with time and gets better the longer you use it.