Fiberglass
 
 



 

Related Categories

WEST System Pigments
WEST System Additives
WEST System Epoxy Additives and Pigments are blended into mixed epoxy to enhance certain physical properties or alter the color or opacity. Blend epoxy additives or pigments into resin and hardener after they are already mixed at the proper ratio (1 pump resin to 1 pump hardener with calibrated Mini Pumps). Additives improve epoxy?s abrasion resistance or moisture resistance. WEST System Epoxy additives include Aluminum Powder, Barrier Coat Additive, Graphite Powder. WEST System Pigments are resin-based and change the color of epoxy. Pigments are available in white, black or gray.
Epoxy WEST System Products WEST System Additives
4oz. White Pigment for WEST System Epoxy
4oz. White Pigment for WEST System Epoxy
4oz. White Pigment for WEST System Epoxy can be added to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1.5 gal of epoxy.  

WEST System 501 White pigment is an epoxy-based liquid colorant used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional paint or UV filter coating for ultraviolet protection.

Price:$18.31

4oz. Gray Pigment by WEST System
4oz. Gray Pigment by WEST System
4oz. Gray Pigment by WEST System can be added to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1.5 gal of epoxy.

WEST System 503 Gray pigment is an epoxy-based liquid colorant used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional paint or UV filter coating for ultraviolet protection.

Price:$18.31

4oz. Black Pigment by WEST System
4oz. Black Pigment by WEST System
4oz. Black Pigment by WEST System can be added to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1.5 gal of epoxy.

WEST System 502 Black pigment is an epoxy-based liquid colorant used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional paint or UV filter coating for ultraviolet protection.

Price:$18.31

West System 423 Graphite Powder
West System 423 Graphite Powder
West System 423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy/graphite is commonly used as a low-load, low-speed bearing surface, as a coating on rudders and centerboards, or on the bottoms of racing craft that are dry sailed. It does not provide antifouling qualities. The epoxy/graphite mixture cures to a black color.

Add to mixed resin/hardener at the rate of 10% by volume or 1.5 tablespoons per 8 fl oz. of epoxy. 12 oz can of 423 will modify approximately one gallon of epoxy.


Price:$19.41

West System 420-36 Aluminium Powder, 36oz.
West System 420-36 Aluminium Powder, 36oz.

WEST System 420 Aluminum Powder will increase the hardness and abrasion resistance of the coated surface and improve its moisture resistance. 420 provides limited protection from ultraviolet light in areas that will not be protected with other coatings, and can be used as a base for subsequent painting. Cures to a metallic gray color.

Add to mixed resin/hardener at the rate of 5%-10% by volume or 1.5 tablespoons per 8 fl oz of epoxy (10 strokes each of resin and hardener from 300  Mini Pumps). 36 oz of 420 will modify up to five gallons of mixed epoxy.


Price:$52.83

WEST System Barrier Coat Additive 422-16
WEST System Barrier Coat Additive 422-16

A proprietary blend designed to improve cured epoxy’s moisture exclusion effectiveness. WEST System 422 is used as a barrier coating additive to help prevent gelcoat blistering in polyester fiberglass boat bulls. 422 also increases the epoxy’s abrasion resistance. Cures to a light gray color.

Add to mixed resin/hardener at the rate of 15 to 20% by volume or 3 tablespoons per 8 fl oz of epoxy. 16 oz can of 422 will modify approximately half a gallon of mixed epoxy.


Price:$26.79

6 Items Found in Epoxy WEST System Products WEST System Additives
.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Fiberglass Supply
11824 Watertank Rd
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: jreeves@fiberglasssupply.com
 

Click to view this Product
West System 420-36 Aluminium Powder, 36oz.
WEST System 420 Aluminum Powder will increase the hardness ...

Price: $52.83 / Each
Add to cart Enlarge
Click to view this Product
WEST System Barrier Coat Additive 422-16
A proprietary blend designed to improve cured epoxy’s...

Price: $26.79 / Each
Add to cart Enlarge

HOME      |     ABOUT      |     PRODUCTS      |     TERMS      |     PRIVACY      |     FAQ      |     ORDER STATUS      |     CONTACT US
 
Copyright Fiberglass Supply. All Rights Reserved.
Powered by Fortune3