Fiberglass
 
 


 

Price Range
Product Type
Sort By
Keyword
Related Categories

Futures Fins

Vents

Sailboard Mast & Fin Box

Stand Up Paddle Board Fin
Stand Up Paddle Board Fin

ConnexSUP Inserts
ConnexSUP Inserts

Surfboard Sealer

Rice Paper

Glass-on Fins

Leash Cups

ProBox Fins

FCS

Longboard Fins and Boxes

Foot Strap Inserts

Surfboard Leashes
Surfboard Leashes

SUP Grip and Traction

Foil Board Components
Surf/Sail components
Surfboard, Sailboard, Kiteboard Components
Surf/Sail components
1 1/4in. Leash Plug,  Black
1 1/4in. Leash Plug, Black
1 1/4in. Leash Plug, Black, these leash cups are our most popular and we have sold tens of thousands of them over the years.

Leash cup features concentric rings that create ledges to lock the leash cup into the board.  Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup.  Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst.  Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board.  After the putty cures sand the putty and the cup level with the surface of the board.

 

Weight .03

Price:Varies by Qty

1 1/4in. Leash Plug,  White
1 1/4in. Leash Plug, White
1 1/4in. Leash Plug, White, these leash cups are our most popular and we have sold tens of thousands of them over the years.

Leash cup features concentric rings that create ledges to lock the leash cup into the board.  Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup.  Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst.  Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board.  After the putty cures sand the putty and the cup level with the surface of the board.

Weight .03

Price:Varies by Qty

1in. Leash Plug,  Black
1in. Leash Plug, Black
1in. Leash Plug, Black, these leash cups are our most popular and we have sold tens of thousands of them over the years.

Leash cup features concentric rings that create ledges to lock the leash cup into the board.  Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup.  Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst.  Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board.  After the putty cures sand the putty and the cup level with the surface of the board.

Weight .02

Price:Varies by Qty

1in. Leash Plug, White
1in. Leash Plug, White
1in. Leash Plug, White, these leash cups are our most popular and we have sold tens of thousands of them over the years.

Leash cup features concentric rings that create ledges to lock the leash cup into the board.  Install the leash cup by drilling with a hole saw a hole slightly bigger than the diameter of the leash cup.  Mix a small batch of putty with resin, cabosil, 3M bubbles or white pigment, and catalyst.  Fill hole about 1/3 - 1/2 full with putty and insert cup. Clean off excess putty leaving putty slightly higher than the surface of the board so that as the resin cures and shrinks it will not shrink back below the level of the board.  After the putty cures sand the putty and the cup level with the surface of the board.

Weight .02

Price:Varies by Qty

Rice Paper, 23 X 33in. Sheet
Rice Paper, 23 X 33in. Sheet

Rice Paper, 23 X 33in. Sheet

Commonly used to print graphics on for surfboard logos, paddle blade graphics or any other application where you want to embed a graphic into a composite laminate.

This rice paper turns clear in the resin making the logo appear printed as part of the board. Double check for ghosting before using against very dark substrates like carbon or wood.

Commonly run through inkjet printers or screen printed on, make sure to double check that the ink system is compatible with your resin system (ink jet printers commonly are compatible).


Weight 0.05

Price:Varies by Qty

Pint, Surfboard Sealer
Pint, Surfboard Sealer
Pint, Surfboard Sealer

Surfboard Sealer is a water based acrylic coating that you apply to a surfboard by wiping on thin coats with a foam brush.  Used to seal the sanded surfboard from dirt and grime and provide a durable finish at a low cost.

For best results apply multiple thin coats to avoid runs or drips.  Build up to the desired finish or thickness.  The sealer does build up to a very slick glossy finish, if a less glossy finish is desired scuff the board with a 3M scotchbrite pad to knock down the gloss.
 

Weight 1.2

Price:$8.14

Quart, Surfboard Sealer
Quart, Surfboard Sealer
Quart, Surfboard Sealer

Surfboard Sealer is a water based acrylic coating that you apply to a surfboard by wiping on thin coats with a foam brush.  Used to seal the sanded surfboard from dirt and grime and provide a durable finish at a low cost.

For best results apply multiple thin coats to avoid runs or drips.  Build up to the desired finish or thickness.  The sealer does build up to a very slick glossy finish, if a less glossy finish is desired scuff the board with a 3M scotchbrite pad to knock down the gloss.

Weight 2.2

Price:$12.16

Gallon, Surfboard Sealer
Gallon, Surfboard Sealer
Gallon, Surfboard Sealer

Surfboard Sealer is a water based acrylic coating that you apply to a surfboard by wiping on thin coats with a foam brush.  Used to seal the sanded surfboard from dirt and grime and provide a durable finish at a low cost.

For best results apply multiple thin coats to avoid runs or drips.  Build up to the desired finish or thickness.  The sealer does build up to a very slick glossy finish, if a less glossy finish is desired scuff the board with a 3M scotchbrite pad to knock down the gloss.

Weight 10

Price:$28.08

FCS SUP Deck Pad Set Black
FCS SUP Deck Pad Set Black
FCS SUP Deck Pad Set Black
Price:Varies by Qty

[ 1 ] 2 3 4 5 6 7 8 9 10
Next >> Next 10 Pages
List All Items
300 Items Found in Surf/Sail components - 34 Result Pages Product Search
.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Fiberglass Supply
11824 Watertank Rd
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: jreeves@fiberglasssupply.com
 

Click to view this Product
12" Clear Dorsal Hatchet Logic 7 Longboard Fin
12" Clear Dorsal Hatchet Logic 7  Longboard Fin. ...

Price: Varies by Qty
Add to cart Enlarge
Click to view this Product
HDM, Gladiator Click-It SUP Fin
HDM, Gladiator Click-It SUP Fin featuring tooless Click-It ...

Price: Varies by Qty
Add to cart Enlarge

HOME      |     ABOUT      |     PRODUCTS      |     TERMS      |     PRIVACY      |     FAQ      |     ORDER STATUS      |     CONTACT US
 
Copyright Fiberglass Supply. All Rights Reserved.
Powered by Fortune3