4 oz. Bottle, Catalyst, (Methyl Ethyl Ketone Peroxide) MEKP
Hi-Point 90 initiator for polyester and vinylester resins, normally added to resin at a rate between 1-3% see resin instructions for details. Mixing instructions are included on the can or bucket.
Azox is a very effective polymerization initator for room temperature cure of polyester and vinylester resin systems. Decreases overall cure time while leaving gel times about the same as with standard initiators allowing a faster turnaround of molds or parts. This is the catalyst we use when doing demos or parts that we want to demold quickly. For example with 8085 infusion resin we generally demold in less than 1 hour on parts with a wall thickness of .050" and with the Hydrex 100 we have gotten demold times as short as 35 minutes with 1.5% Azox at 75F. If you need to speed up your process try Azox.
