Fiberglass
 
 



 

Super Sap CPM

Entropy’s Super Sap® CPM is a compression molding epoxy system for fast cycle times in heat-assisted molding processes of fiber-reinforced composites.  Commonly used for ski and snowboard construction as well as a variety of press molded composites.

CPM Compression Molding Epoxy is a versatile system designed specifically for the compression molding processes of composite parts.  CPM system delivers a high bio-content, excellent fiber wetting qualities, and thixotropic characteristics to limit sag in high-temperature cure applications. A high modulus combined with excellent elongation properties enable durable yet lightweight composite parts. CPM is a SUPER SAP® Formulation.

Available in kits comprised of 2 parts CPM Epoxy Resin and 1 part CPS Slow Hardener

Slow Cure: 50 min pot life, recommended full cure time of 40 min at 180 degrees F/82 degrees C.


Epoxy Entropy Resin Super Sap CPM
Entropy Epoxy Kits CPM with CPS Hardener
Entropy Epoxy Kits CPM with CPS Hardener

Entropy CPM Compression Molding Epoxy Resin with CPS Hardener

Entropy’s Super Sap® CPM is a compression molding epoxy system for fast cycle times in heat-assisted molding processes of fiber-reinforced composites.  Commonly used for ski and snowboard construction as well as a variety of press molded composites.


Click on item for kit sizing and pricing.  Kits are 2:1 by volume and kit sizes start at 3 pints mixed.

CPS Hardener: 50 min pot life, recommended full cure time of 40 min at 180 degrees F/82 degrees C.


Tensile Modulus 436,000 psi
Tensile Strength 8,990 psi
Elongation 6%
Flexural Modulus 412,510 psi
Flexural Strength 13,450 psi
Compression Strength 11,410 psi
Tg Ultimate (F) 154F
Hardness Shore D 70-80
Bio Based Carbon Content (%) 31%
Mix Ratio by Volume 2:1
Mix Ratio By Weight 100:40
Viscosity (A/B/Mixed) @ 77F 1300/450/880
Pot Life @ 77F 50 min
Tack Free Time Hours, 77F N/A
Recommended Full Cure 40 minutes @ 180F

Price:$70.00

Click to Configure
Entropy Super Sap CPM Epoxy Resin
Entropy Super Sap CPM Epoxy Resin

Entropy’s Super Sap® CPM is a compression molding epoxy system for fast cycle times in heat-assisted molding processes of fiber-reinforced composites.  Commonly used for ski and snowboard construction as well as a variety of press molded composites.

Click on item for size and price options.

CPM Compression Molding Epoxy is a versatile system designed specifically for the compression molding processes of composite parts.  CPM system delivers a high bio-content, excellent fiber wetting qualities, and thixotropic characteristics to limit sag in high-temperature cure applications. A high modulus combined with excellent elongation properties enable durable yet lightweight composite parts. CPM is a SUPER SAP® Formulation.

For use with CPS Hardener at a ratio of 2 parts resin to 1 part hardener by volume.  Also available in kits of CPM/CPS

 


Price:$37.50

Click to Configure
Entropy CPS Slow Hardener
Entropy CPS Slow Hardener

Entropy's CPS Slow Hardener is for use with the CPM Compression Molding Epoxy Resin for fast cycle times in heat-assisted molding processes of fiber-reinforced composites.

CPM Compression Molding Epoxy is a versatile system designed specifically for the compression molding processes of composite parts.  CPM system delivers a high bio-content, excellent fiber wetting qualities, and thixotropic characteristics to limit sag in high-temperature cure applications. A high modulus combined with excellent elongation properties enable durable yet lightweight composite parts. CPM is a SUPER SAP® Formulation.

CPS Slow Cure: 50 min pot life, recommended full cure time of 40 min at 180 degrees F/82 degrees C.

Also available in Kits (CPM/CPS)


Price:$37.50

Click to Configure
Entropy Hand Pump Set
Entropy Hand Pump Set
Set of 2 pumps made to be used with Entropy epoxy resin and hardener.  Fits 1 quart, .5 gallon, and 1 gallon Entropy containers. 
Price:$11.00

4 Items Found in Epoxy Entropy Resin Super Sap CPM
.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Fiberglass Supply
11824 Watertank Rd
Burlington, WA 98233
United States
Ph: 877-493-5333
Fax: 360-757-8284
e-mail: Rich@fiberglasssupply.com
 

Entropy Epoxy Kits CPM with CPS Hardener

Entropy CPM Compression Molding Epoxy Resin with CPS Hardener

Entropy’s Super Sap® CPM is a compression molding epoxy system for fast cycle times in heat-assisted molding processes of fiber-reinforced composites.  Commonly used for ski and snowboard construction as well as a variety of press molded composites.


Click on item for kit sizing and pricing.  Kits are 2:1 by volume and kit sizes start at 3 pints mixed.

CPS Hardener: 50 min pot life, recommended full cure time of 40 min at 180 degrees F/82 degrees C.



Price: $70.00 / Each
Add to cart Enlarge
Entropy CPS Slow Hardener

Entropy's CPS Slow Hardener is for use with the CPM Compression Molding Epoxy Resin for fast cycle times in heat-assisted molding processes of fiber-reinforced composites.

CPM Compression Molding Epoxy is a versatile system designed specifically for the compression molding processes of composite parts.  CPM system delivers a high bio-content, excellent fiber wetting qualities, and thixotropic characteristics to limit sag in high-temperature cure applications. A high modulus combined with excellent elongation properties enable durable yet lightweight composite parts. CPM is a SUPER SAP® Formulation.

CPS Slow Cure: 50 min pot life, recommended full cure time of 40 min at 180 degrees F/82 degrees C.

Also available in Kits (CPM/CPS)



Price: $37.50 / Each
Add to cart Enlarge

HOME      |     ABOUT      |     PRODUCTS      |     TERMS      |     PRIVACY      |     FAQ      |     ORDER STATUS      |     CONTACT US
 
Copyright Fiberglass Supply. All Rights Reserved.
Powered by Fortune3